If you have a 1200 or 1210 you should have a high temperature safety switch (a small black board). If there is no power at the board, look to the right of the power board. The inbound DC connections are labeled on the board and usually located at the bottom right hand side of the board. If you aren't sure which they are, remove the power board cover so that you can see where everything connects. Check the input 12V DC reading on the inbound power lines coming to the refrigerator board.The 12V DC powers the rear power board, the front control board, and the interior light. The AC plug that you see in the back is only powering your AC Heater/s that will cool the refrigerator when running it on AC or Auto Mode. Norcold gas absorption refrigerators operate off of 12V DC power (battery power). Gas absorption models are found in RVs while AC/ DC models are found in trucks and boats. It's also important to note that this article is for gas absorption Norcold model refrigerators, not AC/ DC models. No display on the front board and no cooling inside the unit. To be clear, what we're talking about here is the refrigerator acting as if it has no power at all. Is your Norcold refrigerator not turning on?! No problem! We'll give you a list of things to check to get it back on as soon as possible.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |